Our Prestige Number Plate Covers

Number Plate Frames and Covers


Click images to enlarge.

Rear number plate and Kingpin Prestige cover mounted on a LAKIN Custom Plate Bracket.

larger image

There are many different types of number plate frames and covers on the market. Most car dealers use some sort of cheap frame to advertise their dealership on your vehicle. This would be acceptable, IF they at least chose something of reasonable quality which ADDED to your car's value, rather than detracted from it. (You may not be aware that most of the frames used by the dealerships cost them less than $0.50 each!)

However, there ARE good quality covers available. They cost more than the cheapies but they are well worth the investment.

We carry a range of Kingpin Prestige Number Plate Covers.

These covers are legal in all states and territories in Australia. (Click here to view approval documents.)
They are a one-piece, UV stabilized ABS moulding. They are robust, the lenses won't yellow with age and the black surround maintains it's gloss for many years.
They have a neoprene seal around the inside edge of the cover which fits against the raised rim of the number plate to keep out dirt and moisture.
They fit particularly well with our black powder-coated Custom Plate Brackets.
We can also supply a modified version of this cover with an alarm trigger (in combination with our special "alarm-ready" brackets).

See below for details and images of the different styles of cover we stock.


larger image	larger image	larger image

Number Plate Cover details:

Standard size (372mm x 134mm) Kingpin number plate cover.

larger image

Standard size (372mm x 134mm) and
Standard Width Slimline (372mm x 100mm):

These covers attach through the four holes in the corners of the number plate.

Slimline 5 character (315mm x 100mm) and
Slimline 3/4 character (250mm x 100mm):

These covers clip under the lower edge of the number plate and are screwed through the holes along the top edge of the number plate at 210mm centres. In some cases these same holes are used to attach the number plate to the vehicle.

If these are self-tapping screws, you'll find matching screws in the fitting kit supplied with each cover. If these screws are M6 machine thread screws going into special threaded fittings on your vehicle, you'll need our special "Piggy Back" screws. These are available here.

Slimline 5 character (315mm x 100mm) Kingpin number plate cover.

larger image

Slimline 3 & 4 character (250mm x 100mm) Kingpin number plate cover.

larger image

NSW Front Slimline (372mm x 84mm) and
NSW Rear Slimline (372mm x 107mm):

These covers clip under the lower edge of the number plate and are screwed through the holes in the top corners (346mm centres). The holes in the cover are slightly elongated. The fitting kit includes matching rubber seals for these holes.

Full Size Euro (520mm x 112mm):

The full size Euro cover clips under the lower edge of the number plate and is screwed through holes in the top corners. Most Euro plates are not provided with pre-drilled holes; you will need to carefully drill two 6mm diameter holes using the cover as a template.